38 CFR § 4.77
Visual fields
Comes up as a technical measurement standard behind a visual field defect rating.
How the Board actually uses this section
Original RateMyVSO research, catalogued from the full archive of published Board of Veterans' Appeals decisions. No other source measures how each regulation plays out at the Board.
The grant figure reflects the mix of claims where this section comes up, not the legal merit of any single claim.
Read the 1,915 decisions citing § 4.77
The conditions it decides
Decision counts per diagnostic code. Select a bar to read those exact Board decisions.
What this regulation says, in plain English
This section sets the required testing method and equipment for measuring visual fields (a Goldmann or automated perimeter using a specific stimulus size), and explains how to average the results across 8 directions to get one number, then combine that with any separate visual acuity rating.
Read the full text of 38 CFR § 4.77
This text was last amended by VA on August 13, 2018. We check it against eCFR every week.
(a) Examination of visual fields. Examiners must use either Goldmann kinetic perimetry or automated perimetry using Humphrey Model 750, Octopus Model 101, or later versions of these perimetric devices with simulated kinetic Goldmann testing capability. For phakic (normal) individuals, as well as for pseudophakic or aphakic individuals who are well adapted to intraocular lens implant or contact lens correction, visual field examinations must be conducted using a standard target size and luminance, which is Goldmann's equivalent III/4e. For aphakic individuals not well adapted to contact lens correction or pseudophakic individuals not well adapted to intraocular lens implant, visual field examinations must be conducted using Goldmann's equivalent IV/4e. The examiner must document the results for at least 16 meridians 22 1/2 degrees apart for each eye and indicate the Goldmann equivalent used. See Table III for the normal extent (in degrees) of the visual fields at the 8 principal meridians (45 degrees apart). When the examiner indicates that additional testing is necessary to evaluate visual fields, the additional testing must be conducted using either a tangent screen or a 30-degree threshold visual field with the Goldmann III stimulus size. The examination report must document the results of either the tangent screen or of the 30-degree threshold visual field with the Goldmann III stimulus size. #
(b) Evaluation of visual fields. Determine the average concentric contraction of the visual field of each eye by measuring the remaining visual field (in degrees) at each of eight principal meridians 45 degrees apart, adding them, and dividing the sum by eight. #
(c) Combination of visual field defect and decreased visual acuity. To determine the evaluation for visual impairment when both decreased visual acuity and visual field defect are present in one or both eyes and are service connected, separately evaluate the visual acuity and visual field defect (expressed as a level of visual acuity), and combine them under the provisions of § 4.25. #
See the full table on eCFR.
Related Tools and Guides
Read this section on eCFR ↗ · All rating regulations
RateMyVSO. Educational aggregate of published Board of Veterans' Appeals decisions and 38 CFR text. Not affiliated with the VA. Not legal advice. Find a VSO representative.